Operation Manual

Using Font Management Utility
3
Font Management Utility 3-3
3.3 Selecting and adding devices
Before operation, the device must be registered in the Font Management
Utility.
This section describes registering a device in the Font Management Utility.
The two types of lists for selecting a device are described below.
3.3.1 Manually adding devices
To manually add a device to the registered device list, follow the procedure
described below.
To add a device
1 From the Mode choice dialog box, select an operation mode, and click
OK.
Device list Method for adding devices to a list
Registered device list Enters the device name and IP address and connects manually.
Search result list Searches and detects automatically the devices on a network.
2
Note
The automatically detected device can also be added to
the registered device list.
For further details, refer to “Searching for and adding de-
vices” on page 3-7.