Operation Manual

9
Checking the Printing Status and Print Log
9-4
9.2.1 Specifying the log setting
The maximum amount of log data that is saved can be set.
Operating procedure
1 In the main window, click the [Log View] button.
The List of Log dialog box appears.
2 Click the [Log Settings] button.
The Log Settings dialog box appears.
3 Specify the log capacity.
❍ A setting between 100 and 1,000 MB can be specified, however, a
capacity larger than the size of the computer's hard disk cannot be
specified.
4 Click the [OK] button.