Operation Manual

How to Use the Data Administrator
3
Data Administrator 3-77
5 Configure the template, and click [OK].
– Template name:
Input the name of the template to create.
– Enable IP address permission settings:
Select this to enable configuration of IP address filtering.
–Edit:
Configure permitted IP address ranges.
The Edit IP address range screen is displayed. Input the start and
end IP addresses, and click [OK].
– Clear:
Clear the permitted IP address range. Select the permitted IP ad-
dress range from the list, and click [Clear].
– Enable the IP address exclusion settings:
Select this to enable exclusion settings for IP address filtering.
–Edit:
Configure IP address exclusion ranges.
The Edit IP address range screen is displayed. Input the start and
end IP addresses, and click [OK].
– Clear:
Clear the IP address exclusion range. Select the IP address exclu-
sion range from the list, and click [Clear].
The template is created.