Operation Manual

How to Use the Data Administrator
3
Data Administrator 3-50
6 Set the date and time, and click [Change settings].
– Set to the date and time of the PC:
Select this to set the date and time to that of the PC upon which
Data Administrator is being used.
– NTP Server setting: Selected when synchronized with the NTP
server. Enter the NTP server address and the port No.
– Manual Setting:
Select this to manually set the date and time.
Year/Month/Day: Select the date.
Hour(s): Input the time (hours).
Minute(s): Input the time (minutes).
7 Click [Change password].
8 Click [Update] to change the date and time settings.
9 Click [Finished].
The date and time are changed.