Operation Manual

How to Use the Data Administrator
3
Data Administrator 3-25
Set Search Range
1 From the “Import from device screen”, click [Search settings].
The Device search settings screen is displayed.
2 Set the search range, click [Add].
– SNMP community name: Input the SNMP community name.
– Start IP: Input the start IP address of the search range.
– End IP: Input the end IP address of the search range.
– Add: Add a search range for devices.
– Delete:
Delete a search range for devices. Select the search range to delete
from the list, and click [Delete].
3 Click [OK].