Operation Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Installing Box Operator
- 3 Explore Window Settings
- 4 Connecting to the Multifunctional Product
- 5 Managing Boxes
- 6 Managing Documents
- 6.1 Displaying documents
- 6.2 Opening Documents in the Box Operator Viewer
- 6.3 Opening Documents in a Specific Application
- 6.4 To change the document name
- 6.5 To save a document onto the computer
- 6.6 Copying Documents to Other Boxes
- 6.7 Moving Documents to Other Boxes
- 6.8 To delete a document
- 6.9 To print a document
- 6.10 Quick printing
- 6.11 Merging and Printing Documents
- 7 Other Operations
Managing Boxes
5
Box Operator 5-6
5.3 Changing the Name of the Box
Perform any of the following operations to change the name of the box.
- Select the icon for the box to be renamed, and then click [Rename] on the
[File] menu.
- Right-click the icon for the box to be renamed, and then click [Rename].
2
Note
The name of an open box cannot be changed. In addition, the Memory
RX User Box cannot be renamed.
To change the name of a box by using a command on the [File] menu
Before changing the name of a box, check for the following.
0 The password is available for the box to be renamed.
1 Select the icon for the box to be renamed.
2 On the [File] menu, click [Rename].
The Rename user box dialog box appears.
3 In the "Name" box, type the name of the box.
– A maximum of 20 characters can be entered.
4 Click [OK].
– If a password has been specified for the box, the Password
confirmation dialog box appears. Type in the password for the box,
and then click [OK].
The name of the box is changed.