User's Manual

Open Platform Systems LLC © 2019
conforme aux limites d’exposition RF ISED dans des conditions d’exposition mobiles. (Les sont á plus de 20 cm du
corps d’une personne).
OCCSensaBLE Mobile Application
The OCCSensaBLE™ mobile application is available for both iOS® and Android® devices. Search “OCCSensaBLE” in
the app store to download.
The mobile app is a configuration tool used for modifying and testing the OCCSensaBLE™ Bluetooth enabled controller
from a mobile device. It allows wireless access to see the current status and change the configuration of the
OCCSensaBLE™ controller at a range of up to 100 feet. The controller will use the default system values if no
configuration steps are performed.
The configuration tool steps the user through the configuration process using menus and prompts, providing a simple way to
customize the controller based on the user requirements. It can discover multiple OCCSensaBLE™ controllers and display
them based on signal strength and distance. When the configuration tool establishes a secure connection with the
OCCSensaBLE™ controller, it will blink the associated luminaire providing a visual indication of the controller being
configured. Once connected it can change the controller parameters such as motion control sensitivity, min/max output hold
time, min/max output, daylight control mode, and more.
The configuration tool also allows for password protecting the OCCSensaBLE™ controller by locking it to a site location.
When adding a new site location, a password is assigned to the site. When the controller is locked to the site, that password
is stored in the controller. After locking a controller to the site, only someone with access to the site password can make
changes to the controller. Multiple controllers can be locked to the same site, making it easy to password protect a large
number of controllers.
With the configuration tool, a user has the ability save and upload a set of configuration parameters called Profiles. Profiles
allow a user to easily or assign the same configuration parameters to multiple OCCSensaBLE™ controllers without having
to manually configure each one. Profiles are stored in the app and can be assigned to any controller at any site.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure compliance.