Cut Sheet

Form 7, Form 8, and Red•Dot

Conduit Outlet Bodies

Application

Conduit Bodies are installed in conduit systems to:

• Connect conduit sections.

• Act as pull outlets when conductors are being installed.

• Provide easy access for splices in branch conductors.

• Make 90-degree bends in conduit runs.

• Act as mounting outlets for wiring devices and lighting fixtures.

• Provide access to conductors for maintenance and future system changes.

Features

• Standard features include tapered (NPT) threads, integral bushings to protect

wire insulation.

• T&B Form 7 bodies and covers are interchangeable with other manufacturer’s

Form 7 bodies and covers.

• T&B Form 8 bodies and covers are interchangeable with other manufacturer’s

Form 8 bodies and covers.

Materials

• Conduit Bodies (Form 7 and Form 8) - Sand cast class 30 Gray iron alloy.

• Red•Dot

die cast aluminum, copper-free.

• Covers – Sand cast gray iron alloy, and stamped sheet steel-stainless steel

screws.

• Gaskets – Neoprene

Finish

• Conduit Bodies – zinc-plating with an aluminum acrylic coating.

• Covers – gray iron zinc-plating with an aluminum acrylic coating, and

stamped steel zinc-plating with a clear chromate coating.

Compliances

• UL Standard: 514A, 514B

• Fed. Spec: W-C-586D

• CSA Standard: C22.2 No. 18

T&B

Fittings

412031.A01 FIT 3/12 3/13/03 4:46 PM Page 40