Installation Guide

10
CONNECTIONS : RIGHT SIDE PANEL
NX 2
- USB device socket, suitable for USB flash drives or a keyboard. This connection is not suitable for
boot operations. Use the USB connectors on the back of the console for this purpose. Do not exceed a
500mA current on any USB device port.
- The MIDI card provides MIDI In, Out, and Thru 5-pin DIN connectors. The software supports
incoming MIDI Notes, MIDI Show Control, and MIDI Timecode signals.
- The SMPTE device offers 3-pin XLR connectors for SMPTE In and Out signals.
NX WING
- USB device socket, suitable for USB flash drives or a keyboard. This connection is not suitable for
boot operations. Use the USB connectors on the back of the console for this purpose. Do not exceed a
500mA current on any USB device port.
- The MIDI card provides MIDI In, Out, and Thru 5-pin DIN connectors. The software supports
incoming MIDI Notes, MIDI Show Control, and MIDI Timecode signals.
- The SMPTE device offers 3-pin XLR connectors for SMPTE In and Out signals.