7.1

5. Click Browse and locate the .zip file on your local hard drive.
6. Click Save to add the module to PrintShop Mail Web.
Once the connector is uploaded you can proceed with configuring the module.
Before you can add a module to PrintShop Mail Web you must have completed the first run successfully.
Configure a module
To change the settings of a module:
1. Click Settings in the Menu bar.
2. Click Overview in the Modules section from the side menu. The Modules Overview page appears.
3. Click the plus-symbol in front of a module type to view its contents.
4. Select a module by clicking the module name to view its Properties page.
5. Click the Edit button to edit the Properties page:
6. Change the settings of the module and click Save to store the changes.
Delete a Module
To delete module from the Modules overview:
1. Click Settings in the Menu bar.
2. Click Overview in the side menu. The Modules overview appears.
3. Select one or multiple Modules by clicking the checkbox in the first column.
4. Click Delete
5. Click OK to delete the selected Modules.
When a module is marked as system module in the database, the checkbox is disabled. It is not possible to delete the
system marked modules.
©2010 Objectif Lune Inc - 177 -