2022.1

l
Add: Adds a new Media/Tray entry in the table.
l
Delete: Deletes the current Media/Tray selections from the table.
l
/ Move Up / Move Down: Move the selected Media/Tray entries up or down
within the table.
l
Import Tray Settings: Import the Media/Tray settings from a Connect Template.
This entry will only be available for those printers that support the extra information.
The options are to:
l Import from current template, which will import any Media/Tray settings from
the current Connect Template into the table.
l Import from template file, which allows you to browse for a Connect
Template to import the Media/Trays settings from.
There is no restriction on how many Templates you may import settings from.
l Output Destination group: These settings allow for the selection of output bins.
It is available for AFP, IPDS and PCL printers whose Printer Definition caters for multiple
output bins. If the selected Printer Definition does not support bins, this group will not be
visible on the page.
The table has the following choices:
l Trigger:Select what the trigger will be for changing bins. The options are >Page,
>Sheet, >Document, >Document Set or >Job Segment.
l Destination:Select which bin should be used when this trigger is met. The options
will be the bins available to the selected Printer Definition.
l Rules: Defaults to true, but can be altered at will. Double clicking in the field brings
up the Rule Editor, which can be used to construct the rule(s) that determines
whether this bin is to be used or not.
The options (both button and right mouse click context menu)available to the table are:
l
Add: Adds a new bin selection choice to the table.
l
Delete: Deletes the current selection(s) from the table.
l
/ Move Up / Move Down: Move the selected entries up or down within the
table.
l
Edit ...: Edit the current selection.
Default output destination selection:Select the default output bin from those bins
available to this Printer Definition.
Page 699