2022.1

sheet rather than once per document page.
Note
If Imposition options such as auto-positioning and scaling were selected,
these options won't apply to the Additional Content added to the physical N-
Up sheet.
l Left: Enter the distance between the left margin of the page and the Barcode, in
either metric (cm/mm), inch (in) or point (pt) values.
l Bottom: Enter the distance between the bottom margin of the page and the
Barcode, in either metric (cm/mm), inch (in) or point (pt) values.
l KIXCode Properties group:
l Track height: The height of the small vertical centre bars, in metric (mm/cm). Value
must be between 1 mm and 1.6 mm.
l Full bar height: Height of the tallest vertical bars, in metric (mm/cm). Value must be
between 4.2 mm and 5.8 mm.
The ascender and descender bar heights are automatically calculated based upon
the Full and Track bar heights.
l Module width: Thickness of each bar in the Barcode, in metric (mm/cm). Value
must be between 0.4 mm and 0.6 mm.
l Module spacing: The spacing between each bar, in metric (mm/cm). Value must be
between 0.4 mm and 0.7 mm
l Process Tilde:
This selection is not applicable to this barcode type.
l Text: Enter the text used to generate the Barcode.
l
Add button: Click to display a list of variable data that could be used for
generating the Barcode.
This includes metadata fields which must previously have been added in the
Metadata options, likely at the Document Tags level (see Metadata Options), as well
as some information fields.
Page 651