2022.1

l The maximum font size is 1048pt. By default this is 48pt.
When the maximum font size is left blank, the font size in Design view becomes the
maximum font size, so that the text can only be made smaller than its initial size.
5. When the option Fit to width only is checked, no line breaks will be added to the text.
6. Optionally, you can specify a child (an element inside the Box or Div) by giving its ID, for
example: #product, or class, for example: .product - note the dot. The Copy Fit feature
will only be applied to this child element.
Tip
To give an element a class or ID, select it and add the class or ID on the Attributes
pane. An ID is meant to be used once in each section, while a class can be shared
between several elements.
7. Click Apply or OK. Note that the effect of the Copy Fit feature can only be seen in
Preview mode.
If it is impossible to make a text fit within the box with the given minimum and maximum font
size, this will be reported as an error during a preflight (see "Testing scripts" on page399).
How it works
When the Copy Fit feature is activated, the font size is calculated for the entire Box. Elements
inside that Box get a font size relative to the Box. This means that their relative proportions are
maintained.
How to position elements
To position elements in relation to each other in a template, you can wrap those elements in a
Table or Box (see "Table" on page274 and "Boxes" on page252), and/or use the Spacing
property of the elements. The Spacing property can also be used to indent elements or create a
hanging paragraph or image; see "Spacing" on page333.
Aligning objects with an absolute position is easy with the Alignment buttons. Guides help to
align elements as well; see "Aligning objects" on the next page.
The top, right, bottom, and left properties specify offsets from the edges of the element's
containing block.
Page 308