2022.1

Initially the barcode will have the barcode type's default properties. To change those properties,
such as the scale and color, open the Barcode properties dialog: right-click the barcode (on the
Design tab in the Workspace) and select the Barcode... option in the context menu.
Barcode properties
This topic lists the properties of the barcode type Code 128. For the properties of other barcode
types, see "Barcode type and properties" on page196.
Module width
Specifies the width of the narrow bars in centimeters. Changing this value to a higher value will
make the barcode bigger when Scale is set to None.
Code set
Set of characters to be used:
l A: ASCII characters 00 to 95 (0–9, A–Z and control codes), special characters, and FNC
1–4
l B: ASCII characters 32 to 127 (0–9, A–Z, a–z), special characters, and FNC 1–4
l C: 00–99 (encodes each two digits with one code) and FNC 1
In Auto mode, the barcode generator will automatically select the correct encoding mode (set
A, B or C) according to the input data.
If the barcode starts as one subset and then switches to another, set Code set to whatever the
starting set is (not Auto). Enable the Tilde processing option (see below). At the position
where the subset switches, add the following to the input data:
l ~d199 to switch to subset C
l ~d200 to switch to subset B
l ~d201 to switch to subset A
For example, if a barcode in the format AA123456789 must start as subset B, and then switch
to subset C after 1, set the barcode to be: AA1~d19923456789.
Scale
Defines if and how the rendered barcode is scaled in relation to the parent element:
Page 212