2022.1

Setting the paper's characteristics
To set a Media's paper characteristics:
1. On the Resources pane, expand the Contexts folder, expand the Media folder, and
right-click the Media. Click Characteristics.
2. Specify the paper's characteristics:
l Media Type: The type of paper, such as Plain, Continuous, Envelope, Labels,
Stationery, etc.
l Weight: The intended weight of the media in grammage (g/m2).
l Front Coating: The pre-process coating applied to the front surface of the media,
such as Glossy, High Gloss, Matte, Satin, etc.
l Back Coating: The pre-process coating applied to the back surface of the media.
l Texture: The intended texture of the media, such as Antique, Calenared, Linen,
Stipple or Vellum.
l Grade: The intended grade of the media, such as Gloss-coated paper, Uncoated
white paper, etc.
l Hole Name: A predefined hole pattern that specifies the pre-punched holes in the
media, such as R2-generic, R2m-MIB, R4i-US, etc.
3. Click OK.
Rename Media
To rename Media:
l On the Resources pane, expand the Contexts folder, expand the Media folder, right-
click the Media and click Rename. Type the new name and click OK.
l Alternatively, on the Resources pane, expand the Contexts folder, expand the Media
folder, right-click the Media and click Properties. Type the new name in the Name field
and click OK.
Applying Media to a page in a Print section
Every page in a print section has a natural position: it can be the first page, the last page, one of
the pages in between (a 'middle page'), or a single page. For each of those positions, you can
set different Media.
To apply Media to specific page positions in a Print section:
Page 159