2020.2

Note
The Print Manager will use whichever is selected in this list box to
determine when a job is Finished. Once the Counter for this
selection equals the total number of pages in the job, the job will
be considered Finished and it will display as such within the
"Printer Queue pane" on page994.
What choice you make here is dependent upon the capabilities of the
printer. Not all printers will provide all options. For example, some
printers will only return when the job is Committed, rather than when it
has been Received or Stacked.
The full range of choices available to the Print Manager (but not
necessarily the IPDSprinter) are:
l
Received:The amount of pages received by the printer.
l
Stacked:The amount of pages stacked by the printer.
l
Jam Recovery:If a paper jam is encountered, the page number at
which the printer jam occurred.
l
Committed:The number of pages committed to the printer.
l
Operator View:This counter contains the number of pages that
have passed the view of the printer operator. It increments by the
number of pages on a sheet when the last copy of the sheet
passes the view of the printer operator.
l
Ack Pages: The number of pages to send to the printer for printing
before sending an acknowledgement request.
Acknowledgement requests slow the printing process down, as the
printer needs to process the request and return the information.
The default Ack Pages number is now 10 pages which means the Print
Manager will send an acknowledgement request to the printer in
increments of 10 pages, until the end of the job. Given the overhead in
processing such requests, the smaller the Page number, the slower the
printing becomes, but the higher the granularity of the reporting and error
correction. If speed is of the essence you might like to increase the
Page 991