2020.2

Note
If Imposition options such as auto-positioning and scaling were selected,
these options won't apply to the Additional Content added to the physical N-
Up sheet.
l
Left: Enter the distance between the left margin of the page and the Barcode, in
either metric (cm/mm), inch (in) or point (pt) values.
l
Bottom: Enter the distance between the bottom margin of the page and the
Barcode, in either metric (cm/mm), inch (in) or point (pt) values.
l
Data Matrix Properties group:
l
Module Width: Specifies the width of the narrow bars. Changing this value to a
higher value will generally make the Barcode bigger.
l
Encoding: The data represented in the symbol can be compressed using one of the
following algorithms:
l
Auto: Automatically detect the data content and encodes using the most
appropriate method. This is the default option.
l
ASCII: is used to encode data that mainly contains ASCIIalphanumeric
characters (ASCII0-127). Use where Barcode size is a concern and where the
data is alphanumeric.
l
Base 256: used to encode 8-bit values.
l
C40: used for data that mainly consists of numbers and upper-case alphabetic
letters.
l
Text: used for data that mainly consists of numbers and lower-case alphabetic
letters.
l
None: Does not use any encoding.
l
Format: select the Barcode size format from the drop-down list .
l
Process Tilde:
Check this option to process tilde characters in the data as special characters.
Note: with this option checked, any tilde that needs to be included in the output must be
escaped by adding another tilde: ~~.
Page 616