2020.2

When black is a composite of CMYK or RGB values, it may incur a color click charge on some
printers. Check the Output in Grayscale option to make sure that pure black is used.
Output format
Defines how the barcode is output on the page. There are two possible formats:
l
SVG: Vector format. This is usually of higher quality, but may take longer to generate and
is not compatible with Email output.
l
PNG: Binary rasterized format. This has a slightly lower quality than SVG but is usually
generated faster and will display properly in Email output.
Royal Mail 4-State Mailmark C, Royal Mail 4-State Mailmark L
Royal Mail 4-State Mailmark C and Royal Mail 4-State Mailmark L are some of the types of
barcodes that can be added to a template; see "Barcode" on page196.
The barcode can be added either using the Barcode toolbar button or through selecting Insert
> Barcode on the menu; see "Adding a Barcode" on page196.
Initially the barcode will have the barcode type's default properties. To change those properties,
such as the scale and color, open the Barcode properties dialog: right-click the barcode (on the
Design tab in the Workspace) and select the Barcode... option in the context menu.
Barcode properties
This topic lists the properties of the barcode types Royal Mail 4-State Mailmark C and Royal
Mail 4-State Mailmark L.
For the properties of other barcode types, see "Barcode type and properties" on page198.
Height, width and spacing
The height, width and spacing of the barcode are all measured in pixels (38 dpi).
l
Bar height: The height of the (shorter) bars.
l
Extended bar height: The total height of the extended bars.
l
Bar width: The width of the bars.
l
Spacing: The distance between the bars.
Page 247