2020.2

Print settings in the Print context and sections
The following settings in the Print context and Print sections have an impact on how the Print
context is printed.
Arranging and selecting sections
The Print context can contain one or more Print sections. When generating output from the Print
context, each of the Print sections is added to the output document, one after the other in
sequence, for each record. The sections are added to the output in the order in which they
appear on the Resources pane. This order can be changed; see "Print sections" on page134.
It is also possible to exclude sections from the output, or to include a section only on a certain
condition that depends on a value in the data; see "Conditional Print sections" on page351.
This can also be done using a Control Script; see "Control Scripts" on page417.
Printing on both sides
To print a Print section on both sides of the paper, that Print section needs to have the Duplex
printing option to be enabled; see "Enabling double-sided printing (Duplex, Mixplex)" on
page143. This setting can not be changed in a Job Creation Preset or an Output Creation
Preset.
Note
Your printer must support duplex for this option to work.
Setting the binding style for the Print context
The Print context , as well as each of the Print sections, can have its own Finishing settings. In
printing, Finishing is the way pages are bound together after they have been printed. Which
binding styles can be applied depends on the type of printer that you are using.
To set the binding style of the Print context:
1.
On the Resources pane, expand the Contexts folder; then right-click the Print context
and select Finishing.
Alternatively, select Context > Finishing on the main menu. This option is only available
Page 132