2020.2

l
Add Time Stamp checkbox: Select to have a time stamp added to any files as
they arrive in the Hot Folder.
l
Formatselection: Select the format of the time stamp to add to files in the Hot
Folder.
l
Session Retries: The number of times Print Manager will try to reconnect to the printer
before it stops trying and instead produce a timeout error in the messages.
l
Printer Timeout (sec): The startup time (in seconds) allowed to the printer before a
timeout error is reported in the messages.
l
Printer Ack Timeout (sec): The time (in seconds) that the Print Manager waits for a
response (an Acknowledgement) from the printer after sending a response request.
l
Retry Delay: The time (in seconds) that the Print Manager waits before retrying a job after
a timeout.
l
Log Level: Use the drop-down to select which Print Manager logging level to use.
Note
This logging relates to Print Manager job processing, and not to internal Print
Manger debugging. Settings for the internal logs are catered for in the generic "Log
Settings" on page1016 pages.
The selection of logging chosen here will determine what is displayed in the Print Wizard
Message Pane.
Higher logging levels such as "Debug" and "Status" provide more details but will have an
impact in terms of processing time and resources required.
You might need to adjust this setting based upon your production facilities, production
speeds and logging requirements. Some sites might decide that "Error" logging levels
(which only records Errors, and thus should be the minimal logging option) are all they
need.
Tip
We recommend leaving the logging level set at the default level of "Info", unless
otherwise needed.
Page 1014