2020.1

Printing on both sides
To print a Print section on both sides of the paper, that Print section needs to have the Duplex
printing option to be enabled; see "Enabling double-sided printing (Duplex, Mixplex)" on
page140. This setting can not be changed in a Job Creation Preset or an Output Creation
Preset.
Note
Your printer must support duplex for this option to work.
Setting the binding style for the Print context
The Print context , as well as each of the Print sections, can have its own Finishing settings. In
printing, Finishing is the way pages are bound together after they have been printed. Which
binding styles can be applied depends on the type of printer that you are using.
To set the binding style of the Print context:
1.
On the Resources pane, expand the Contexts folder; then right-click the Print context
and select Finishing.
Alternatively, select Context > Finishing on the main menu. This option is only available
when editing a Print section in the Workspace.
2. Choose a Binding style and, if applicable, the number of holes. For an explanation of all
Binding and Hole making options, see "Finishing options" on page659.
To set the binding style of a Print section, see "Setting the binding style for a Print section" on
page140.
Overriding binding styles in a job creation preset
A Job Creation Preset can override the binding styles set for the Print sections and for the Print
context as a whole. To bind output in another way than defined in the template’s settings:
1. Create a Job Creation Preset that overrides the settings of one or more sections: select
File > Presets and see "Job Creation Presets Wizard" on page652 for more details.
2. Select that Job Creation Preset in the Print wizard; see "Generating Print output" on
page928.
Page 130