2019.2

If you do need to change the Logging pattern, please see the Pattern Formatting
guide for help in doing so.
l
Log message preview display: This displays a real time example of the format and
content of individual log file entries, based upon the Logging pattern setting.
Advanced Log Settings
The Advanced settings over-ride the Overall logging settings, and provide a greater level of
logging granularity.
Warning
Higher logging settings will have an impact upon Connect production speeds, as well as
leading to substantially larger log files.
The Advanced Log Settings should only be set in conjunction with advice from
OLsupport, to ensure that only the most relevant settings are set to the higher logging
levels.
This Preferences page allows you to add ( ) or remove ( )individual Connect Packages, or
change their logging settings ( ).
SNMP Connection Settings
Options for printers that support Simple Network Management Protocol (SNMP) connection.
Not all IPDSprinters do, but most PostScript and PCL printers will. This protocol allows the
printers to communicate their status to the Print Manager.
All the SNMPsettings relate to SNMPconnection and re-connection attempts. They are:
l
Connection attempts entry: Defines the number of times the Print Manager will attempt
to connect to a printer before abandoning the attempt. This setting applies only when the
Print Manager is started.
l
Polling interval (secs) entry: Defines the polling interval in seconds.
This determines how often the PrintManager attempts to communicate with the printer,
Page 987