2019.2

Printer Details
l
Enable Printer: Check to enable the printer settings.
Printers can be Enabled or Disabled using this check box, or via the Enable / Disable
options in the "Printers pane" on page958.
l
Printer Type: Select the type of printer to add, from the drop down list.
l
Name: Enter a name that describes the printer in the list.
l
IP Address: Enter the IP Address or machine name of the printer.
l
Port (IPDS Only): Enter the port on which the printer communicates.
l
LPR (PCL and PostScript Only): Enter the printer queue.
Tip
RAW will work as a generic queue option for most PCL and PostScript
printers.
Those PCL and PostScript printers that support multiple queues can have
multiple entries in the Print Manager. One for each Queue.
l
Hot Folder subsection: Defines folders from which print output files are
automatically captured and sent to the appropriate printer queue.
l
Enable Hot Folders: Check to enable hot folders. Browse to set the folders
via the Browse ( ) button.
Up to three Hot Folders can be set. One each for High, Medium and Low
priority queues.
An additional "Set Job on Hold" option is available which assigns jobs to the
target printer but puts them 'On Hold'. They will not be taken from the queue
and processed until manually released.
l
IPDSOptions subsection: IPDSspecific options contained in 3 tabs. The tabs are:
l
Extended Options tab:
Defines logging of printer activities. The options are:
l
Page Counters: IPDSPrinters return counters for various categories,
from which you can chose.
Page 960