2019.1

infile:///<path>, for example:
file:///c:/resources/images/image.jpg.
l
Url lists image files from a specific web address. Select the protocol (http or
https), and then enter a web address (for example,
http://www.mysite.com/images/image.jpg).
Note
If a URL doesn't have a file extension, and the option Save with template is
not selected, the Select Image dialog automatically adds the filetype
parameter with the file extension as its value (for example: ?filetype=pdf
(if it is the first parameter) or &amp;filetype=pdf).
The filetype, page and nopreview parameters are not sent to the host;
they are used internally. Therefore, URLs that rely on one of these parameters
cannot be used.
l
With an external image, you can check the option Save with template. If this option
is checked, the file will be inserted in the Images folder on the Resources pane at
the top left.
If it isn't saved with the template, the image remains external. Note that external
images need to be available when the template is merged with a record set to
generate output, and that their location should be accessible from the machine on
which the template's output is produced. External images are updated (retrieved) at
the time the output is generated.
3. If the image is a PDF file that consists of more than one page, select the desired page.
Note
The number of pages in a PDF file cannot be determined via the HTTP and HTTPS
protocols. If you wish to use a page other than page 1 in a remote PDF, check the
option Save with template; then click OK and reopen the dialog. Next, on the
Resources tab, select the PDF, and select a page.
4.
Click Finish. The image will be inserted at the position of the cursor.
Page 257