2018.2

l Add: Adds a new Media/Tray entry in the table.
l
Delete: Deletes the current Media/Tray selections from the table.
l
/ Move Up / Move Down: Move the selected Media/Tray entries up or down
within the table.
l
Import Tray Settings: Import the Media/Tray settings from a Connect Template.
The options are to:
l
Import from current template, which will import any Media/Tray settings from
the current Connect Template into the table.
l
Import from template file, which allows you to browse for a Connect
Template to import the Media/Trays settings from.
There is no restriction on how many Templates you may import settings from.
Dynamic PPD Options
The Dynamic PPD mode options page allows you to add PostScript printer capabilities to
Connect, through the printer's associated PostScript Printer Definition (PPD) file, and to assign
rules to them to trigger those capabilities in conjunction with Connect Templates.
Note
This Print Wizard page is intended for use by those operators who are very familiar with
their PostScript printers capabilities as well as the options available to them in the
printer's associated PPD file.
A video example of how to set Dynamic PPD Options can be found here:Setting
Dynamic PPD Options within Connect - An example
The Dynamic PPD mode Options page can be broken up as follows:
PPDInfo group
This shows information about the selected PostScript Printer Definition. The information box
contains general printer details (such as the model name) whilst the PPDfile name field
displays the name of the actual PPDfile that is loaded.
If the incorrect PPD was assigned to this Printer Model, the PPD file can be changed at this
Page 682