2018.2

l
Size: Use the drop-down to select the size of the physical media the output is to be
printed upon.
l
Orientation: Select orientation (aspect ratio) of physical media sheet (Landscape or
Portrait).
l
The Width and Height values are real-only and appear for display and design
purposes only.
l Output diagram and validation. Use the settings here to control how the output diagram is
to look and behave. It contains the following options:
l
Display size entry: Chose between a pre-set viewing percentage, or manually enter
whatever percentage you would like, or select Fit Page or Fit Width to have the
diagram display the page(s) within the diagram window dimensions.
l
Use the zoom in/out buttons / to increase or reduce the viewing percentage
by 25% increments.
l
Sample size entry: Set the sample output size here. The number selected here will
be reflected within the output diagram, if applicable.
l Output diagram:A real-time display that reflects the selections made in the
Imposition Options page. The blue page(s) are the individual logical page(s), upon
a white background that represents the physical Imposition Sheet.
If the settings are invalid, the display will appear as red, such as in the following
diagram:
In this case the logical pages are too large to fit on the selected Imposition Sheet.
l
Position group: These settings apply to the positioning of the logical page(s) within the
Imposition Sheet.
Page 511