2018.2

When black is a composite of CMYK or RGB values, it may incur a color click charge on some
printers. Check the Output in Grayscale option to make sure that pure black is used.
Output format
l Defines how the barcode is output on the page. There are two possible formats:
l
SVG: Vector format. This is smaller in size, but not compatible with Email output.
l
PNG: Binary rasterized format. This is slightly larger than SVG but will display properly in
Email output.
OneCode, KIX Code, Australia Post
OneCode, KIX Code and Australia Post are some of the types of barcodes that can be added
to a template; see "Barcode" on page176.
The barcode can be added either using the Barcode toolbar button or through selecting Insert
> Barcode on the menu; see "Adding a Barcode" on page176.
Initially the barcode will have the barcode type's default properties. To change those properties,
such as the scale and color, open the Barcode properties dialog: right-click the barcode (on the
Design tab in the Workspace) and select the barcode type on the shortcut menu.
Barcode properties
This topic lists the properties of the barcode types OneCode, KIX Code and Australia Post. For
the properties of other barcode types, see "Barcode type and properties" on page179.
Height, width and spacing
The height, width and spacing of the barcode are all measured in pixels (38 dpi).
l
Bar height: the height of the (shorter) bars.
l
Extended bar height: the total height of the extended bars.
l
Bar width: the width of the bars.
l
Spacing: the distance between the bars.
Page 199