2018.1

l
X: Enter the horizontal distance between the left side of the page and the left side of
the signature, in points (pt).
l
Y: Enter the vertical distance between the top of the page and the top of the
signature, in points (pt).
l
Width: Enter the desired width of the signature, in points (pt).
l
Height: Enter the desired height of the signature, in points (pt).
Advanced Print Wizard navigation options
l
Preview button:Click to launch a Proof Preview window, which displays how the printed
output would look based upon the currently chosen selections.
l
Back and Next buttons:Used to navigate back and forth through all the selected options
within the Wizard. Up until the Print button is pressed, one can reverse all the way
through the wizard to return to the main selection page (the "Print Options" on page552
page) and add or remove printing options from the print run.
l
Print button: Click to produce print output according to the current settings. This can be
done at any point within the Wizard, whether or not all the options selected in the "Print
Options" on page552 page have been completed or not.
l
Cancel button:Cancels the Print Wizard, without creating any printout.
Printer Settings
The Printer Settings page provides options for cut-sheet printers. It maps media types to
printer trays.
It is available for AFP, IPDS, PCL and PostScript printers that are configured for cut-sheet
printing.
l
Map media by options:Select from following choices:
l
Media Attribute displays all Media details, except the Tray selection.
l
Tray displays just the Media name and Tray selections.
l
Both displays all Media details.
l
Media/Tray Table columns:
l
Media: Lists the Media name, as defined in the template.
l
Tray: Use the drop-down to select in which Tray to send any page using the media.
Page 531