2018.1

l
Orientation: Select orientation (aspect ratio) of media (Landscape or Portrait), or
allow Connect to automatically determine the proper aspect ratio (Auto-Rotate).
l
Position: Select from following options:
Note
If "Booklet Options" on page556 were selected, then the Position settings
are pre-set and cannot be altered here.
l
Auto-positioned: This option creates unscaled imposition-ed pages.
l
Scale to fit: Scales the imposition-ed pages so they fit on the N-Up stock. The
scaled pages are then auto-positioned as usual.
l
Offset: Allows for the selection of an offset position. The imposition-ed pages
will be laid out so that the top left corner of the top left imposition-ed page is
located at the selected offset.
If Offset is chosen, then the Left Offset and Top Offset selection boxes
become active.
Note
The offset measures from the top left of the physical N-Up sheet to the
top left imposition-ed page. If Auto-Rotate is selected(causing the N-Up
stock to be rotated to fit the imposition-ed pages) then the measurement
becomes the top left position of the rotated stock. i.e. The top left corner
does not rotate with the stock.
l
Rotate final output Sheet 180 degrees (upside down):Select to flip the output
upside down.
l
Repetition group:
Allows selection of how many Sections are to be placed, both Horizontally and Vertically.
This is the total number of items, not the number of additional items being placed.
Page 472