2018.1

Note
If a URL doesn't have a file extension, and the option Save with template is not selected,
the Select Image dialog automatically adds the filetype parameter with the file
extension as its value (for example: ?filetype=pdf (if it is the first parameter) or
&filetype=pdf).
The filetype, page and nopreview parameters are not sent to the host; they are
used internally. Therefor, URLs that rely on one of these parameters cannot be used.
With an external image, you can check the option Save with template. If this option is checked,
the file will be inserted in the Images folder on the Resources pane at the top left.
If it isn't saved with the template, the image remains external. Note that external images need to
be available when the template is merged with a record set to generate output, and that their
location should be accessible from the machine on which the template's output is produced.
External images are updated (retrieved) at the time the output is generated.
Sheet Configuration dialog
The Sheet Configuration dialog defines how different Print context sections output on different
Media (see "Media" on page134) and using different Master Pages (see "Master Pages" on
page131).
General options
The first option defines Duplex printing, which also enables or disables the settings for the
Back side of each sheet.
If Duplex is enabled, you can also:
l
Check Omit empty back side for Last or Single sheet to reset a page to Simplex if it
has an empty back side. Thus changing a Duplex job into a Mixplex job may reduce
volume printing costs as omitted back sides aren't included in the number of printed
pages.
l
Check Tumble to duplex pages as in a calendar. (On Portrait output, this would be
equivalent to short-edge duplex.)
l
Check Facing pages to have the margins of the section switch alternately, so that pages
are printed as if in a magazine or book.
The Media rotation setting rotates the Media
Page 415