1.8

l
Rotate final output Sheet 180 degrees (upside down):Select to flip the output
upside down.
l
Repetition group:
Allows selection of how many Sections are to be placed, both Horizontally and Vertically.
This is the total number of items, not the number of additional items being placed.
Note
If Booklet Binding were selected, some of these settings will be determined by the
options made within the "Booklet Options" on page489 Page and they cannot be
altered here.
l
Gap group:
Allows selection of the amount of blank space (either Horizontal and/or Vertical) to add
between each page.
Note
If Booklet Binding were selected, some of these settings will be determined by the
options made within the "Booklet Options" on page489 Page and they cannot be
altered here.
l
Order group:
Note
If Booklet Binding were selected, some of these settings will be determined by the
options made within the "Booklet Options" on page489 Page and they cannot be
altered here.
l
Page Order: Select in which direction to go when adding sections to the output:
l Left to right, then top to bottom
l
Right to left, then top to bottom
Page 416