8.8

Output to Capture OnTheGo
The Output to Capture OnTheGo task sends document information to the Capture OnTheGo
online repository. These documents can then be retrieved by the Capture OnTheGo mobile
application.
This task can be added as an Action task (see "Action Tasks" on page264) or as an Output
task. Adding it as an Action task enables the process or branch to continue after this task. An
Output task is always located at the end of a process or branch.
Input
This task ignores the input data file and any metadata it unless data selections are used in the
variable data fields.
Processing
This task does not process the data or metadata file. The information entered in the Deposit tab
of this task is sent to the repository configured in the Repository tab.
Output
The output that this task produces is the information sent to the Capture OnTheGo online
repository (the document ID).
Properties
Repository Tab
The Repository tab is where you enter the connection information necessary to create the link
between OL Connect or PReS and CaptureOnTheGo.
l Repository ID:Enter a valid Capture OnTheGo Server user name (mandatory).
l Password:Enter the password (mandatory) that corresponds to the Repository ID
entered above.
l Show password:Check this box if you want to see the password you type in the
Password box.
Page 445