8.4

closed with the OKbutton, and are displayed in The Task Comments Pane.
PReS Fax
PReS Fax output tasks are used to make request to PReS Fax, which creates faxes and sends them to a
faxing program.
In addition to the job-specific PReS Fax properties you configure in the task’s Properties dialog box, there
are configurable options common to all PReS Fax outputs processed by a given computer (See "PReS Fax
Plug-In Preferences" on page 568). Note that those options are specific to each PReS Fax installation and
that they are immediately applied.
Input
Any data file with a valid Emulation. Metadata is optional and can be used to specify the fax number and
information to send the file. Alternatively, a TIFFfile in the proper page size and compression (CCITT Group
4) can be used.
Processing
If a data file with metadata is used, the data file is merged with the selected PReS Connect document,
converted into a multi-page TIFF file with CCITTGroup 4 compression, and sent to the PReS Fax host
specified in the properties. If the file is a TIFFfile in the proper format and the "Pass-through"option is
selected, no processing is done, the file is sent as-is.
Output
ATIFF in the CCITTGroup 4 compression, and information for the FAXserver to know where to send the
file.
Task Properties
General tab
l Host: Select the IP address of the PReS Fax host to which you want the request to be sent. The Fax
configuration is set in the PReS Fax User Options on the target host.
l Refresh: Click to update the list of IP addresses displayed in the Host drop-down list box.
l Documents: Select a specific PReS Connect document if you want all the jobs to be faxed with that
document. You must select a document, pass-troughs are not available.