2022.2

l
Delete: Click to remove a command from the Commands box.
l
Command description: Use this box to edit the description of the command currently selected
in the Commands box.
l
Command value: Use this box to edit the code of the command currently selected in the Com-
mands box. Use the right-click menu for a list of standard printer control characters. (See also:
"Frequently used printer control characters" on page95.)
Note: If you plan to use an LPR output printer queue to send PlanetPress Design documents gen-
erated using the Optimized PostScript Stream option, you should not enter data selections in the
Printer address and Queue name variable property boxes. If you do need to use information
stored in the data to configure the LPR output printer queue, you should first use Job info vari-
ables to store the information, and then use these variables in the Printer address and Queue
name variable property boxes.
FTP Output Printer Queue
Unlike FTP output tasks, which are typically used to send data files to FTP sites, FTP output printer
queues are mostly used to send print jobs to FTP sites.
FTP output printer queue properties are as follows:
General tab
l
FTP Server: Enter the IP address or host name of the FTP server.
l
User name: Enter an FTP server user name.
l
Password: Enter a password associated with the FTP server user name entered above.
l
Use FTP Client default port number: Forces the FTP connection on port 21, the default FTP
port.
l
FTP Port: Enter the FTP port to use. This option is disabled if Use FTP Client default port num-
ber is checked. The port should always correspond with the server's port number.
l
Directory: Enter the directory to which the print jobs are to be uploaded. If you leave this box
empty, the job files are sent to the root directory of the FTP server.
l
File name: Enter the name under which the print jobs will be saved. Consider using a dynamic
name, since using a static name will cause every new file to overwrite the previous one.
l
Connection mode group
l
Active: Select to prompt the FTP client to use active mode when sending files to the FTP
server.
Page 98