2020.2

separated by a CR-LF pair.
"ExtractText2(left, top, right,
bottom)" on page268
String Returns the text located inside the region
bounded by the left, top, right and bottom
parameters. If multiple lines are found,
they are separated by a CR-LF pair.
"MediaSize()" on page269 "IPdfRect" on
page276
Returns the size of the actual media, i.e.
the sheet of paper.
"setIncludeBorders
(pbIncludeBorders)" on
page269
Sets whether or not borders are included
for IPage.ExtractText2(). If true, a character
is considered to be inside the region using
the 30% rule (i.e. at least 30% of the
character must be enclosed in the region).
Otherwise, the character must be entirely
enclosed in the region to be returned.
"setTolerances
(tolerableDeltaWidth,
tolerableDeltaHeight,
tolerableDeltaFontHeight,
tolerableGap)" on page269
Sets the floating point values for the
tolerable factors.
"Merge(imageFile, left, top,
rotateAngle, scaleFactor)"
on page270
Inserts an image file and places it on the
page at a specific location.
Supported image types are: JPG and
PNG.
"Merge2(srcPage, left, top,
rotateAngle, scaleFactor)"
on page271
Transparently places a PDF page on top
of the current page at a specific location.
"MergeToLayer(imageFile,
left, top, rotateAngle,
scaleFactor, layerName)" on
page272
This method behaves the same as Merge()
but allows to insert the image as a layer
(aka an Optional Content Group).
Supported image types are JPG and PNG.
"MergeToLayer2(srcPage, This method behaves the same as Merge2
Page 264