2018.2

l
Data File: The data file to use in the run. This file can be explicitly selected, or it could be
set via a Connect Workflow variable.
Note
Note: If the Data File selection does not include the data file folder path, then the
folder entered into the Working Folder entry will be used for determining the path.
l
Working Folder: Select the folder that contains the PReS Classic job and associated
resources.
This entry can either be explicitly selected or it could be set via Connect Workflow
variable.
If the PDC File selection contains a full folder path along with the filename, then the
Working Folder does not need to be selected, as Connect Workflow will use the path
contained in the PDC File entry.
Note
If the PDC File selection contains a folder path and the Working Folder also has
an entry, then the PDC File entry will be appended to the Working Folder entry.
One should be very cautious doing this, as it could easily lead to errors.
l
PDL Type: Select the desired PReS Classic output type for the job.
Note
Not all PReS Classic jobs can be swapped between output types. Jobs designed
for certain output types (such as AFPDS) will likely have settings specific to the
original output type.
Changing the output type at this point will likely lead to errors or require job
Page 442