2018.1

Messenger access
Manually adding new entries to the list
To grant access to the Messenger service you can manually add new entries to the list:
l Open the Access Manager.
l
Make sure you are in the Messenger tab.
l
In the IP address box, enter the IP address of the remote machine.
l
Click on the button.
l Add the necessary permissions.
l Click OK.
l Restart the Messenger service.
Note
The format of the IP address must be one of the following:
l
127.0.0.1: The local computer. Typically this IP should have all the accesses
checked.
l
255.255.255.255: Everyone on the same subnet. This is equivalent to hard-coding
the current subnet, such as 192.168.1.255 or 10.0.0.255.
l
192.168.0.42 : A single IP address. This can be any valid address on the same
subnet.
l
10.0.255.255: Any IP in the 10.0.X.X range.
Automatically detecting machines on the network and adding them
To detect machines on the network automatically, and give them access to the Messenger
service:
1. Make sure the machine you want to detect is turned on and the Messenger service is
started.
2.
Click on the Refresh button under the list.
3. Add the necessary permissions to the detected machines.
Page 600