2018.1

PReS Workflow server.
3.
Click OK.
Importing PlanetPress Design documents
This procedure describes how to import PlanetPress Design documents into PReS Workflow.
Importing documents can be useful when transferring configurations between PReS Workflow
installations.
To import documents into PReS Workflow:
1.
Click the PReS Workflow button.
2.
Choose Import, then Import PlanetPress Document. The Import PlanetPress Design
Document dialog box appears.
3.
In the File type box, select the desired file type.
4.
Navigate to the document you want to import, select it and click Open.
The document is imported and displayed in the Configuration Components pane under
PPS/PSM Documents. This physically installs the documents to the Documents folder relative
to the install folder of PReS Workflow.
Using files attached to PlanetPress Design documents
Data files
When sending a PlanetPress Design Document from PlanetPress Design to PReS Workflow,
all data files used in the document are automatically sent to PReS Workflow along with the
Design document. These data files appear under the document in the PPS/PSM Documents
section of the Configuration Components.
Setting an attached data file as a sample data file in a process
The attached data file can be used as a sample data file in a process. This sets the emulation
of the process ("About data emulation" on page52) and makes it possible to debug it (see
"Debugging your PReS Workflow process" on page88).
1.
Make sure the PPS/PSM Documents section is visible by clicking the button if it
appears.
Page 40