8.8

l Selection rectangle:Select whether your selection rectangle (used to select multiple
objects by dragging a rectangle around multiple objects)will be displayed as a dotted line
rectangle, or a blended rectangle (normally a blue rectangle with darker blue border).
l Button Style: Select whether to show the expansion links as either an arrow (points right
for a closed tree, down for an open tree)or a square (shows a minus symbol for an open
tree, plus symbol for a closed tree).
l Show Tree Lines:Check to choose whether or not to display the lines that connect the
different objects in the Configuration Components pane.
l Show Grid Lines:Check to choose whether or not to display grid lines between each
object in the Configuration Components pane.
l
Hot track:Check to choose whether or not to display the object in the Configuration
Components pane under the mouse cursor as being underlined.
l
Reset To Defaults button:Click to reset all the Configuration Components pane
appearance options to their default values.
Default Configuration behavior preferences
l
Use default configuration:Check to use default input and output tasks when you create
a new process. If this group is not selected, each new process you will add will begin and
end with unknown tasks.
l
Default input task: Select an input task to use as the default input task when you
add a new process. Click the Configure button located to the right of this box to set
the properties of the selected input task.
l
Default output task: Select an output task to use as the default output task when
you add a new process. Click the Configure button located to the right of this box to
set the properties of the selected output task.
l
Enable Undo/Redo functionality: Select this option to enable or disable the Undo
functionality. Disabling the Undo/Redo functionality frees up a lot of memory and may
thus speed up your system. The maximum number of steps performed is set in the box
below.
l
Auto Save every: Select to enable the Auto Save functionality. The auto save delay is
set in the box below (in minutes).
l
Enable printer information validation when opening a Watch configuration file: If one
of the processes in the configuration file contains a Print using a Windows printer driver
plugin, the printer information (printer name, driver size and version) will be checked and
the update process will be performed as required.
Page 734