8.8

l Data location:Determines what files are sent into the process:
l Envelope:Only the request envelope is sent to the process (see above).
l Attachments: Each attachment is sent down the process (see above).
l
Unzip attached file: Select to unzip the attached files.
l
Zip password: Enter the password required to unzip the attached files (if any). Note
that you can use variables and data selections.
l Conditions:Defines a filter on capturing files from the SMTPService's hot folder. When a
condition is added, only files that match this filter are captured, the rest remain untouched.
l
“Subject” contains: Select to limit those messages used by this task to those with
a specific subject. The subject you enter in the box below can include variables and
wildcards.
l
Nothing: Select to limit those messages used by this task to those that do not
specify any subject.
l
“From” contains: Select to limit those messages used by this task to those that are
sent from a specific address. The address you enter in the box below can include
variables and wildcards.
l
“To” contains: Select to limit those messages used by this task to those that are
sent to a specific address. The address you enter in the box below can include
variables and wildcards.
"Other" Tab
l Job Information group
l Information elements:indicates what job infos are automatically created by the
input task.
l Add lines before first data page:Using the arrows keys you can add any job
information directly at the beginning of your data file.
l Backup input files:Check this to save a copy of each data file that is captured by your
input. These files are saved in the PlanetPress Suite Workflow Tools working folders
under the "Backup"folder.
l Backup filename:Enter the filename that you wish the input data file backup to be saved
under.
l Delete Existing Metadata:Check to remove any metadata from memory. This option is
disabled on initial input tasks, and is checked by default on secondary input tasks.
Page 257