8.7

To cut and paste tasks or branches:
1. In PlanetPress Workflow Process area, select the task or branch you want to cut and
paste.
2.
From the Home tab in the Ribbon, choose Cut (or right-click and select Cut from the
drop-down menu).
3. To paste the task or branch to a different process, select that process.
4. Select the task or branch crossing above which you want the task or branch to be pasted.
5.
From the Home tab in the Ribbon, choose Paste (or right-click and select Paste from the
drop-down menu).
To copy and paste tasks or branches:
1. In PlanetPress Workflow Process area, select the task or branch you want to copy and
paste.
2.
From the Home tab in the Ribbon, choose Copy (or right-click and select Copy from the
drop-down menu).
3. To paste the task or branch to a different process, select that process.
4. Select the task or branch crossing above which you want the task or branch to be pasted.
5.
From the Home tab in the Ribbon, choose Paste (or right-click and select Paste from the
drop-down menu).
There are a few things to keep in mind when pasting tasks:
l When you cut a task or branch, it disappears from the Process Area but is kept in your
clipboard until it is pasted somewhere else.
l You can cut or copy a task or branch from one process and paste it in another process or
subprocess.
l
When you cut an input or output task, it is replaced with an Unknown Task, that you will
need to replace with another task for the process to be functional.
l If you cut one task or branch, then cut another one, the first one is lost and replaced by the
second. Remember however that you can always undo the command to retrieve it (see
Undo a Command).
Page 733