8.6

To save the current configuration under a new name:
l
From the PlanetPress button, choose Save As.
l Browse to the location where you wanted to save the file, enter the new name of the
configuration in the File name box and click Save.
Sending a Configuration
PlanetPress Workflow Configuration saves entire configurations in the form of a single file. Like
any other file, configuration files may be saved and reopened, as well as rename as desired.
Simply saving a configuration has no effect on the configuration actually used by the
PlanetPress Workflowwhen it is started. To change any currently active configuration, you must
use the Send Configuration command.
When you use the Send command, the PlanetPress Workflow Configuration program uses the
currently opened configuration to overwrite PlanetPress Workflow service's current
configuration.
If PlanetPress Workflow service is running when you send a new configuration, it stops and
restarts automatically with the new configuration. If the service is stopped, it will not start
automatically.
To send a PlanetPress Workflow Configuration to the local server:
1. Open the configuration you want to use as PlanetPress Workflow’s new configuration.
2. Edit the configuration, if required.
3.
When the configuration is ready to be used, from the PlanetPress Workflow button,
choose Send Configuration, then Send Local.
To send a PlanetPress Workflow Configuration to a remote server:
1. Open the configuration you want to use as PlanetPress Workflow’s new configuration.
2. Edit the configuration, if required.
3.
When the configuration is ready to be used, from the PlanetPress Workflow button,
choose Send Configuration, then Send Remote.
Alist of available PlanetPress Workflow servers on the local network appears.
Page 604