8.5

l
No source port range restriction: Select to remove any restrictions on the port PlanetPress
Workflow uses to send the job file via the LPR/LPD protocol. Clear to restrict the port used to
send the job to one in the range between 721 and 731.
l Print up to: Select the maximum number of files that can be simultaneously sent to print by the
LPR output service.
l Error handling group
l
Max. retry period: Select the maximum time period, in hours, within which PlanetPress
Workflow attempts to dispatch the job using the LPR output before giving up. Note that entering a
maximum retry period of 0 hours disables retries altogether.
l
Retry interval: Select the interval, in seconds, at which time PlanetPress Workflow attempts to
dispatch the job using the LPR output. This takes place only within the Max. retry period, after
which the attempt ends.
l
Keep a backup when error occurs: Select to move the job file to a local folder relative to your
install folder called pplpr\error in the case of an error.
l LPR settings group
l
Time-out: Set the time in seconds the PlanetPress Workflow process waits when it sends jobs
using the LPR protocol. The default value for the Time-out property is 7200 seconds (2 hours).
On a time-out, partially sent data files are not passed to the rest of the process; the LPR output
resets and is ready to send further data files. Log messages include the time-out duration.
l
Polling interval (seconds): Select the period of time—the default is 4 seconds—for which
PlanetPress Workflow is to wait when it finishes dispatching jobs to the LPR printer queues
before polling the LPR output folder again.
PrintShop Web Connect Service User Options
PrintShop Web Connect service preferences control the credentials to log into the PrintShop Web server.
The available preferences are as follows:
l User name: Enter the user name of a valid PrintShop Web user, mostly operators.
l Password: Enter the password associated with the user name on the PrintShop Web server.