8.5

l Pidget setting:Triggered by specific pidget settings.
l Every pidget setting (such as stroke color and stroke thickness)is listed here. If the
specific pidget was triggered before ink was applied to the Capture Field, the
conditions becomes true.
l Start timestamp: Triggered when the first ink is applied in the field.
l Before:If the first stroke found in the Capture Field was made earlier than the
specified date and time, the condition becomes true.
l After:If the first stroke found in the Capture Field was made later than the specified
date and time, the condition becomes true.
l In the last:If the first stroke found in the Capture Field was made within the specified
number of Hour(s), Day(s) or Week(s) counting backwards from the moment the
PGCis received, the condition becomes true.
l End timestamp: Triggered when the last stroke finishes in the field. (see Start Timestamp
for detailed options)
l Pen Id: Triggered by the ID(serial number)of the pen. A box provides a way to specify
which Pen IDwill trigger this condition to be true.
l Field List Value: Triggered only on Field List Capture Fields. Abox provides a way to
specify which value will trigger this condition to be true.
l Content Status:Triggered when the field is in a specific status. ADrop-down provides a
way to select which status will trigger this condition to be true.
l Complete:The field contains ink and no error was detected.
l Empty:No ink was found in the field.
l Error:A logical error was detected in the field. This can happen, for example, if a field
was re-written when it should not, a List Field set to only accept one option contains
ink in both options, etc.
l ICRValue:Triggered when the value given by the ICRengine compares with the specified
value. Operators are available for the comparison (such as Equal, Not Equal, Lower or
Higher Than, Contains and etc). It is also possible to select which Index of the field to use
(See Ink is Present" above).
l ICRConfidence:Triggered when the confidence percentage the ICRengine gave to the
ICRvalue compares with the value determined in the "Confidence"box, using the chosen
comparison operator.