8.5

emails sent to it. This is due to a technical limitation that will be resolved in a future version.
Processing
The task reads the incoming SMTPrequest and provides the data within its body.
Output
Depending on the Data Location option, the output is different:
l Envelope: The request file in XMLformat, including all email fields (from, to, cc, bcc, subject, body) as
well as additional header fields (email client information, attachments, etc). The message body and
attachments are available through specific XMLattributes. These files do not have the full path, but
you can use the %t variable to get the current temporary folder where they are located.
l Attachments:The input task loops through each attachment and sends them down through the
process. While the Envelope is not available, the Job Infos contain pretty much all of the information
you would get from it.
SMTPInput task properties are as follows:
l Data location:Determines what files are sent into the process:
l Envelope:Only the request envelope is sent to the process (see above).
l Attachments: Each attachment is sent down the process (see above).
l
Unzip attached file: Select to unzip the attached files.
l
Zip password: Enter the password required to unzip the attached files (if any). Note that you can
use variables and data selections.
l Conditions:Defines a filter on capturing files from the SMTPService's hotfolder. When a condition is
added, only files that match this filter are captured, the rest remain untouched.
l
“Subject” contains: Select to limit those messages used by this task to those with a specific
subject. The subject you enter in the box below can include variables and wildcards.
l
Nothing: Select to limit those messages used by this task to those that do not specify any
subject.