8.5
Table Of Contents
- Table of Contents
- Welcome to PlanetPress Workflow 8.5
- System Requirements
- Basics
- Features
- The Nature of PlanetPress Workflow
- About Branches and Conditions
- Configuration Components
- Connect Resources
- About Data
- About Documents
- Debugging and Error Handling
- The Plug-in Bar
- About Printing
- About Processes and Subprocesses
- Using Scripts
- Special Workflow Types
- About Tasks
- Task Properties
- Variable Properties
- Working With Variables
- About Configurations
- About Related Programs and Services
- The Interface
- Copyright Information
- Legal Notices and Acknowledgements
The PGCPOSTURLshould correspond to your server name or IP, Port and the HTTPAction task of your
HTTPInput, if that is what you are using.
Example:http://127.0.0.1:8080/ProcessPGC
Bluetooth Connectivity
The Anoto penDirector program can also connect directly to the pen via wireless Bluetooth and receive
PGCfiles directly through the Bluetooth link, without needing to dock the pen.
To pair penDirector with an Anoto Digital Pen:
1. Make sure that a Bluetooth dongle is present and enabled on the computer where penDirector is
installed.
2.
Note down the PINof the Anoto Digital Pen, by docking the pen and going in the Pen settings tab of
penDirector and looking at the Pen access group at the bottom of the dialog. The default PINis 0000.
3. Undock the pen, or remove its protective cap if it is not docked. Make sure the power light on the pen is
turned on and green in color.
4.
Go in the Bluetooth tab of penDirector and click on Add Pen.
5.
Click on Search while the cap is off on the pen.
6.
When the pen is found, click on it and then click Add.
7. When asked for the PIN, enter the one noted above.
8.
Click OKto save the settings.
The settings for Bluetooth PGChandling are separate from the ones used when docking. Through
Bluetooth, only a single storage and PGCPost URLlocation can be set for all PGCs.
Warning
Because the Bluetooth configuration only handles a single route, it is not possible to use the Design
preview patter, or the special registration pattern, using Bluetooth connectivity. To use the preview
Pattern in PlanetPress Design or use the special registration pattern, the pen's docking station must
be used.
To specify where to send the PGC files received through Bluetooth: