8.4

preview patter, or the special registration pattern, using Bluetooth connectivity. To use the preview
Pattern in PlanetPress Connect or use the special registration pattern, the pen's docking station must
be used.
To specify where to send the PGC files received through Bluetooth:
1. Open penDirector.
2. Go to the Bluetooth tab
3. Click on the paired pen that you want to configure
4. Specify a PGCStorage folder
5. Check the PGCPOSTURLoption
6. Enter the URLof your PGChandling process in the box
7. Click OKto save.
PlanetPress Mobile Application
The PlanetPress Mobile application can be installed on some mobile phones and enable fast and direct
connectivity between the Anoto Digital Pen and PlanetPress Workflow. The connectivity between the pen
and the mobile phone is done through Bluetooth, while the connectivity between the mobile phone and
PlanetPress Workflow is through the currently active data plan (either wifi or the cell phone company's data
plan, such as 3G).
PlanetPress Capture Implementation Restrictions
This document describes the limitations of the Anoto Digital Pen &Paper Technology, especially in regards
to using it within a PlanetPress Workflow implementation. Note that these limitations apply to any Anoto
technology implementation and not just our own.
Printer limitations
Any document printed with Capture Fields (aka Anoto Patterns)must be sent through a Laser printer.
Bubble jet printers are not supported and will most likely cause reading errors with Anoto Digital Pens.
Thermal printers will not work either due to the low quality printout and the absence of actual blank ink on
the paper.
Black ink close to patterns
Because the Anoto Pen &Paper technology relies on infrared to read pure-black dots on the paper, it is
imperative that no other black ink interfere with this reading. Though it is possible to print Capture
documents on a black &white laser printer as long as there is no other ink on top of, or close to, the patterns,