2022.2

l
Connect Proxy Address: Enter the machine name or IP Address where the OL Connect
Server resides.
l
Port: Enter the port to use to communicate with the OL Connect Server.Default: 9340
l
User name: Enter the user name expected by the OL Connect Server.
l
Password: Enter the password expected by the OL Connect Server for the above user
name.
l
Timeout in seconds: Set the timeout period in seconds.
l
Protocol: Set the protocol (HTTP/HTTPS) used to communicate with the Connect Server.
When HTTPS is selected, the TLS 1.2 encryption protocol is used in order to secure the
data being transferred between the two servers. When this protocol is selected, Port is set
to 443, the default port for this protocol.
l
Email Creation Settings
l
Mail Host: Enter the default SMTP Server host or IP Address.
l
Sender address: Enter the default email address used as the sender (FROM) address.
l
User name: Enter the default user name for the SMTP Server if it requires it.
l
Password: Enter the password for the above user name.
PDF text extraction tolerance factors
When extracting text from a PDF (for example, through a data selection), a lot more happens in the
background than what can be seen on the surface. Reading a PDF file for text will generally return text
fragments, separated by a certain amount of space. Sometimes the text will be shifted up or down, spa-
cing will be different, etc. In some cases, every letter is considered to be a different fragment.
Text formatting features such as kerning, bold, exponential, etc, may cause these fragments to be con-
sidered as separate even if, to the naked eye, they obviously belong together.
The PDF Text Extraction Tolerance Factors is used to modify the behavior of data selections made
from PDF data files from within PlanetPress Workflow. Each factor available in this window will determ-
ine if two fragments of text in the PDF should be part of the same data selection or not.
Caution: The default values are generally correct for the greatest majority of PDF data files. Only
change these values if you understand what they are for.
Delta Width
Defines the tolerance for the distance between two text fragments, either positive (space between frag-
ments) or negative (kerning text where letters overlap). When this value is at 0, the two fragments will
need to be exactly one beside the other with no space or overlap between them.
Page 655