2022.1

to map it again. This creates a limitation in PlanetPress Workflow: if you create a mapped drive
as a user, you will not have access to this mapped drive while running as a service unless you
log off, and then have PlanetPress Workflow Tools map the drive using a Run Script action
inside a Startup Process.
In addition, the use of network shared drives can cause issues when attempting to capture files
from those locations since the notification process for folder changes on network shares may be
different than that of local folders.
Network ports used by each service
The port configuration for each PlanetPress Workflow Input task or Output task is described in
the following table. The port number assignments comply with Internet standards. If a
PlanetPress Workflow component is not active, the port is not used.
For information about ports used by other PlanetPress components, see Network
Considerations in Connect's Online Help.
Component Protocol Local Port Remote Port
Email Input
(POP3 mode)
TCP Default
1
110
Email Input
(Outlook mode)
TCP see Remote
Port
See Network Ports Used by Key
Microsoft Server Products
(https://msdn.microsoft.com/en-
us/library/cc875824.aspx)
Folder Capture TCP/UDP Default
1
Standard Windows file and printer
sharing ports
2
:
l UDP 137, 138; TCP 139 (NetBIOS
over TCP/IP (NetBT))
l UDP 445; TCP 445 (SMB over
TCP/IP)
LPD Input TCP 515
(listening
N/A
Page 24