2020.2

Warning
The default values are generally correct for the greatest majority of PDF data files. Only
change these values if you understand what they are for.
Delta Width
Defines the tolerance for the distance between two text fragments, either positive (space
between fragments) or negative (kerning text where letters overlap). When this value is at 0, the
two fragments will need to be exactly one beside the other with no space or overlap between
them.
When this value is at 1, a very large space or overlap will be accepted. This may case "false
positives" and separate words and text blocks may be considered as a single word if the value
is too high.
Accepted values range from 0 to 1. The default value is 0.3, recommended values are between
0.05 and 0.30.
Delta Height
Defines the tolerance for the height and position difference between two target fragments. The
higher the number, the more difference between the fragment's height (the tallest font
character's height) will be accepted and the more vertical distance between fragments are
accepted. Exponents, for example, are higher and lower.
When this value is 0, no vertical shift is accepted between two fragments. When the value is 1,
the second text fragment can be shifted by as much as the height of the first fragment.
Accepted values range from 0 to 1. The default value is 0.15, recommended values are
between 0.00 and 0.50.
Font Delta Height
Defines the tolerance for the difference in average height of fonts in the two target fragments.
The higher the number, the more difference in average font heights will be accepted. The
average font height is bigger in text written in uppercase than text written in lowercase.
Page 776